1911 Firearm Addicts banner
10mm
1-20 of 168 Results
Advanced
  1. 1911 Gunsmithing
    Hello I am new to the forum. I just started my first 1911 build last week. I chose Nighthawk Customs because they had an entire kit available in 10mm, and I did not want to go the 80% route. It was on sale also and the only kit available. Did I make a good decision? I know absolutely...
  2. Firearm Classifieds
    Nighthawk Heinie Longslide 10mm for sale for $3,100 + shipping. Awesome and incredibly accurate pistol that’s been a safe queen. Comes with its factory bag and 3 mags. Would consider trades (money on either side as appropriate) for a higher end 45 longslide, STI DVCs, or Wilson/Nighthawk...
  3. Caliber Talk: Ammunition, Reloading, and Shooting
    I have gotten into using VV for my 45 acp loads. Was curious if anyone had used any for 10mm? Thinking 180-200 grn loads. I have both a ramped and unramped guns. I read on 10mm forum about using n350 and n105, but most of that was shooting in glocks. Anyway. Just curious.
  4. General 1911 talk
    I stripped down my Rock today and looked around to see the different wear marks or lack there are in some areas. Since I do not completely know this platform like I do others I want to share my pictures. If you see something say something. This has about 500 rounds through it, not many due to...
  5. Sold/Expired Classifieds
    About 5 months ago, I purchased this Colt Delta Gold Cup with thoughts that it would stay with me for the foreseeable future. Things change and I have decided to let it go to a new home, hopefully one of the Addicts. According to the Colt Registry, this is a 1989 model. Since purchasing, I...
  6. General 1911 talk
    Contemplating picking up a LS 1911 in 10mm for some pistol hunting. What would be you choice?
  7. Member Feedback
    My Easter Sunday treated me to meeting @BCD 45, an Addict many of you hold in high regard. After our FTF transaction for the two ‘Hawks pictured below I can now officially join the ranks of grateful brothers in arms for someone who we’re all lucky to have among us. A true gentleman, as honest as...
  8. Sold/Expired Classifieds
    Interested in trading my Nighthawk Heinie Longslide 10mm for a Nighthawk longslide 45acp with a light rail (ideally with a magwell too but it’s not a deal breaker). Can add some $ depending on the pistol. Incredibly accurate, just want to diversify my longslide calibers.
  9. Sold/Expired Classifieds
    Trying to find a Springfield Xdm in 10mm preferably the long slide version shipped to Alaska. Need a bear gun for the wife. Let me know what you have Thanks DDever for selling me one at a reasonable price. I appreciate it.
  10. Sold/Expired Classifieds
    This is the last of my DA/SA pistols in am selling. Purchased new by me and less than 100 rounds fired. Manufactured 07/25/2017. The only changes are a set of Hogue rubber grips (the original G10 grips are included). Also, the plastic case, 2 magazines and an Armory Craft straight trigger...
  11. Sold/Expired Classifieds
    Hello Fellow Addicts, After much deliberation, soul searching, and mixed feelings on this, I am going to sell off all but a handful of guns. I have some debt that is unrelated to firearms, and it would be much smarter to pay this debt off rather than have these just sit in my safe unused. I...
  12. General 1911 talk
    I read in another thread where someone mentioned dumping all of their 45 ACP for 10mm. So what would be the advantages or disadvantages odd such a move? Is the 10mm that much better at penetration and stopping power and/or capacity than 45ACP? I mean I could see where it could run hotter. Also...
  13. Caliber Talk: Ammunition, Reloading, and Shooting
    Just started reloading again after many years. Reasons are obvious. Recently bought a Dillon 750L package with 9mm die set. I'm wanting to expand to different calibers but Dillon won't even return my calls. Excluding Dillon's dies, any recommendations on who makes high quality carbide die...
  14. General 1911 talk
    I have recently begun my search for a 10mm in the 1911 platform. I have a Sig P220 and B&T APC10, but have been wanting a 1911 10mm. I have been looking for a DW Vbob or Cbob in 10mm, but since they aren’t in current production, are rare as hens teeth. Now for my current dilemma. I have...
  15. General 1911 talk
    Quick! Someone talk me out of buying one! OK, fine! Tell me about them. I have had a bunch of 10mms and a CBOB 10mm and 5 inch DW so I might need a 6 inch version. Any cons?
  16. General 1911 talk
    In talking about 1911 barrels, I have always believed that a ramped barrel was better for high pressure calibers (that includes all except .45 ACP) in 1911 pistols due to better chamber support. Apparently some gun makers, such as Wilson Combat, believe the same. However, as far as I know, Colt...
  17. General 1911 talk
    Took delivery of my first 1911 10mm today. It is a Fusion Reaction, which I believe is part if the Freedom series. I am impressed with the build quality for an economy priced gun. It was about $880 shipped to my FFL dealer. Unlike all of the Colts I have owned, there is NO slide rattle. The fit...
  18. Sold/Expired Classifieds
    I'm based out of California so I cannot purchase a 9mm or 10mm Nighthawk unless it's a private party transfer. IF someone in California is looking to sell one, please contact me.
  19. Sold/Expired Classifieds
    For sale, (5) New, never used Glock G-20 10mm 15 Round Magazines. Gen 4, Glock G20MAGHF $100.00 + 10 Shipping = $110.00 Cleaning out the closet. PM me. Sonny
  20. Sold/Expired Classifieds
    Been considering a 5" Gov 1911 in 10mm. I have a Commander and long slide. So... Open two Dan Wesson's especially! Maybe a NH or WC. Thanks and just respond on the thread. If I'm interested I will PM you back.
1-20 of 168 Results
Top