1911 Firearm Addicts banner

Discussions Showcase Albums Media Media Comments Tags

1-20 of 98 Results
  1. 1911 Photo Gallery
    This one just came in. I was skeptical about it actually being "factory new," it being the old, 2014 "Heinie" style, but it's cleaner than clean. There seems to be some kind of coating on the barrel, as it is not polished stainless, but looks rather like a matte stainless; any ideas? I have a...
  2. Sold/Expired Classifieds
    Nighthawk Custom Enforcer - full size railed .45 acp with magwell, lanyard attachment and two tone finish. Sent to NHC for new hi-viz straight eight night sights in 2021. comes with upgraded Nighthawk medallion super scoop grips. Comes with everything from NHC including (4) NHC mags new in...
  3. Sold/Expired Classifieds
    Up for your consideration is a like new Nighthawk Custom Vice President chambered in 9mm. I've run around 100-150 rounds through it and have cleaned it after every session. It comes complete with two magazines, bag, literature , range bag and test target. $4000 USD + shipping to CONUS only.
  4. General 1911 talk
    Aaaaaannnnnnddd now I'm sleeping on the couch. Just playin'! I was fortunate to spend alot of time around both of these brands. And now, because of the Jess & and the guys at @TheWichitaGunClub , I own one of each!! Handguns really aren't my thing (I'm more of an AK/MilSurp guy), but these...
  5. Sold/Expired Classifieds
    As much as I regret letting this go, I am selling this Nighthawk Custom Talon II chambered in 10mm. This firearm has approximately 400 rounds fired so far, which it has cycled flawlessly. Has wear on the barrel bushing and rear slide checkering from carry/use. Will come with 2x mags, an...
    $2,225 USD
  6. Sold/Expired Classifieds
    Fellow Addicts, As mentioned in my post When Life Gives You Lemons… I’ll be listing over a dozen pistols for your consideration. Number thirteen is a Nighthawk Custom Chairman chambered in .45 ACP. I purchased this pistol in June from our highly esteemed sponsor Jess @TheWichitaGunClub...
  7. Sold/Expired Classifieds
    I'm in the market for a NHC TRS Comp. Bonus points for one with the blacked out option but the standard configuration would be just as appealing. Let me know if you have one you're willing to move for cold hard cash. Thanks, fellow Addicts!
  8. 1911 Photo Gallery
    After purchasing my first, and currently only, Colt last summer from @Karl Beining I shipped her off to Nighthawk Custom for a complete makeover to include the following custom work: Checker Front Strap 30 LPI Machine Front Sight Cut (Novak Cut) Machine Rear Sight Cut (Novak Cut) Barrel...
  9. Member Feedback
    My Easter Sunday treated me to meeting @BCD 45, an Addict many of you hold in high regard. After our FTF transaction for the two ‘Hawks pictured below I can now officially join the ranks of grateful brothers in arms for someone who we’re all lucky to have among us. A true gentleman, as honest as...
  10. General 1911 talk
    So I am buying one more nice 1911 and I will be done for a little bit. I will go through George at Gunslingers because he has always taken excellent care of me with every order placed. This will be the most I have spent on a 1911 thus far. All my other builds have been in the $3500 range. I...
  11. General 1911 talk
    I want to build a lightweight 1911 from Nighthawk in 45 ACP. I am told the options I can finish a lightweight frame are more limited. I want a black type finish and told my options are either Anodized Black or Cerakote. Anybody have any pics or experience of what the anodized black looks ...
  12. General 1911 talk
    Happy Sunday Addicts, I’ve identified the pistol that’ll make our collection complete at this point in time (famous last words?) and would love to hear the thoughts of my fellow Addicts re: caliber choice. A few things to consider: I have not shot a compensated gun of any type I do not reload...
  13. General 1911 talk
    I have a 2008 year of manufacture 10mm DW CBOB that has work done by Nighthawk in 2016. They cut the barrel flush with the barrel bushing and put a target crown on the barrel. Also, installed a new trigger that feels lighter and a big improvement in feel over the other CBOB's I have owned. It...
  14. General Firearm Discussion
    Before Christmas I posted a question here on the forum regarding what to do with a 2007 Nighthawk Talon showing an unusual wear pattern on the back of guide rod and the front of the barrel lugs. Contact between those two points had actually peened the inside edge of the barrel link slot to the...
  15. General 1911 talk
    I am not trying to make a vs thread. I obviously respect both companies and am tempted by both. If I go Alchemy I'm gonna get a Prime Elite 9mm. Nighthawk I am getting a Classic model in 9mm. The Nighthawk optioned out how I want is gonna be about $4400. The Alchemy about a grand less. I...
  16. Sold/Expired Classifieds
    Looking to add another Nighthawk to the collection. Looking to stay around $3,500 or less. Must haves: -Full size 5" only -.45 ACP -All steel -Single Stack -Recon Rail -Magwell is a plus Models I am interested in: -Enforcer -GRP Recon -Firehawk -Predator -President -Shadow Hawk -War Hawk...
  17. Nighthawk Custom
    Well I recently sold my Wilson Combat to fund another Nighthawk. I have decided on the Agent 2 in 9mm but am unsure of what finish I want. Anyone with an Agent 2 please post some pictures to give me ideas! These are the finishes that stand out to me. Which would you choose??
  18. Sold/Expired Classifieds
    Looking to part with this very lightly used WC. I have only put about 250 rounds through it so it is almost new. Grey/blue frame with black slide. 3 dot night sights. Comes with everything from factory plus an OWB shark skin holster and IWB cowhide holster. Includes all original paperwork and 5...
  19. Nighthawk Custom
    Have a NC Vice President, Talon Govt and ordering a GRP Commander with options shortly. The VP is mostly what I'm looking to retain the finish on (DLC) with holster wear. The Talon and the GRP I plan on beating the **** out of (nitride). There are so many options out there unfortunately, and...
  20. General 1911 talk
    Placed an order about 2 months ago for a custom Shadowhawk in 9mm. It should be done soon! It will be all black and will have an extra barrel that will be threaded for my suppressor. It will be similar to this build. Can't wait!
1-20 of 98 Results
Top