Joined
·
792 Posts
Anybody load.327 Fed on a Dillon? I’ve got mine almost setup. I’ll be using RCBS dies for the recapping, sizing and seating/crimp as I’ve read where Dillon 32 H&R dies don’t work.
I’ll be using 100 grain Hornady XTP bullets, Starline brass and small pistol primers with 2400 powder. I’m thinking 13 grains although that amount fills the case pretty good. I’ll be compressing the charge with the seated bullet.
Any thoughts would be appreciated.
I’ll be using 100 grain Hornady XTP bullets, Starline brass and small pistol primers with 2400 powder. I’m thinking 13 grains although that amount fills the case pretty good. I’ll be compressing the charge with the seated bullet.
Any thoughts would be appreciated.