1911 Firearm Addicts banner
1 - 1 of 1 Posts

·
High Power Fan
Joined
·
108 Posts
First thing I would check... make sure the trigger lever is in the right spot. When you pull the trigger rearward (slide off the frame), it should rise straight up out of the frame and contact the front end of the sear lever in the slide. The rear end of the sear lever moves down and comes in contact with the sear, releasing the hammer. Is the sear lever moving properly?

When disassembled, does the hammer function properly?

If you can't figure it out, you could phone (or email) a friend at BHSS!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top