1911 Firearm Addicts banner

1 - 20 of 20 Posts

·
Registered
Joined
·
388 Posts
Discussion Starter #1 (Edited)
56C751B1-9C47-40A9-9D89-684E9ADF36E8.jpeg
3785B26E-77B5-4B87-914D-A29DC8E718F1.jpeg
FB347821-0FDF-47B9-89B5-1CB2ACA057C9.jpeg
DF90ACA7-22EF-4FDD-B2BF-C2469973F8F7.jpeg
View attachment 463515
F8088C3F-90DC-4C92-8C77-894BED6FF131.jpeg
7E7FD994-282F-48F2-92A0-E7D646C647C5.jpeg
View attachment 463277 View attachment 463279 View attachment 463283 View attachment 463285
6B2DAFE9-D46D-42CA-9B11-F8BEF66767F3.jpeg
View attachment 463279 View attachment 463277 View attachment 463285 View attachment 463283 View attachment 463281 Colt Series 70 built by SACS.

Hard chrome, checkered, Chen magwell, etc. Night sights.

This gun originally came with a 10-8 bobbed hammer, which I didn’t like the look of. I had Jojo’s Gunworks fit the Commander hammer that is on it now, I have the 10-8 hammer as well.

I also had Jody at Jojo’s Gunworks scallop the grip safety for a higher hold on the pistol. He then refinished the gun in hard chrome. They use the same chrome shop as Colt in East Hartford.

When SACS built this they cut the front serrations on the right side a little off. I don’t know if it’s the angle or the depth, but it’s pretty minor, you have to have the right light to see it.

Most of the parts are engraved by SACS with the last 4 digits of the serial number.

When I got the gun I found it shot a little high for me. So I sent it to John Harrison and he installed his ledge three dot night sights.

Sold locally.
 

Attachments

·
Pigtails and butter please...
Joined
·
2,914 Posts

·
Registered
Joined
·
388 Posts
Discussion Starter #9
I have the original safety that came with the gun. I had this one fitted by Jojo’s Gunworks as well.

It came with a bobbed 10-8 hammer, I have that too and I had this for me fitted by Jojo’s as well. So it’ll come with both hammers and safeties.
 

·
ISO The Very Best 1911's
Joined
·
1,294 Posts
I have the original safety that came with the gun. I had this one fitted by Jojo’s Gunworks as well.

It came with a bobbed 10-8 hammer, I have that too and I had this for me fitted by Jojo’s as well. So it’ll come with both hammers and safeties.
Was it rechromed after the work or just blasted?
 

·
Registered
Joined
·
6,740 Posts
That's a lot of gun , rearward right side fcs appears to not be at same angle as left side but it could just be pic angle. Lots to like on this pistol, with work completed by some of the best

GLWS
 

·
Registered
Joined
·
388 Posts
Discussion Starter #17
I’d be interested in trades too. Just not 5” .45’s. I’m buried in 5” guns.

Commander, 9mm, rail guns.
 
1 - 20 of 20 Posts
Top