Dan Wesson kinda day!

Discussion in 'General 1911 talk' started by zipper046, Feb 17, 2019.

Tags:
  1. zipper046

    zipper046 Well-Known Member

    Dec 28, 2013
    So took my DW CCO (.45acp) and DW ECO (9mm) to the range this AM. I had to replace the recoil spring in the ECO...had a few Failure to Return to Battery, so replaced what was in it. Couldn't find a 18lb flat wire recoil spring for a 3.5" 1911 anywhere...so ordered a 22lb recoil spring for a Wilson Sentinel from EGW and cut a few coils down until the gun ran without issue. Worked like a charm!

    So here are some quick shots when I remembered to take some photos:

    DW ECO: 10 yds slow fire with AGUILA 124 grain
    ECO 10yds 124 grain slow fire.JPG

    DW ECO: 10 yards "quick" fire (1 shot per second) with CCI Blazer 124gr
    Eco 10yds 124 grain quick fire.JPG

    DW ECO: 12 yards - double taps with CCI Blazer 124gr
    ECO 12yds double taps 124gr.JPG

    DW CCO: 12 yards "quick fire" (1 shot per second) with Speer Gold Dot 230gr
    CCO 12yd gold dots.JPG

    DW CCO: 12 yards "quick" fire (1 shot per sec) with WINCHESTER JHP 230gr
    12 yds winchester HP quick fire.JPG

    DW ECO:
    InkedECO_LI.jpg

    DW CCO:
    InkedCCO_LI.jpg

    Now to find a good leather OWB holster for the ECO (preferably with about 10 degree forward cant)....
     
    Whiten, 10mm Guy, ronin11 and 10 others like this.
  2. BennyAdeline

    BennyAdeline Official Hi-Point Brand Representative

    640
    Nov 26, 2018
    Great guns, great write up, and great shooting! Thanks buddy!
     

  3. Addicted2gunz

    Addicted2gunz Undecided on whether or not I'm indecisive... Supporting Addict

    Jul 14, 2018
    Russell Made Holsters - I absolutely love mine!!
    1544668351627.jpg 20181217_220529~01.jpg
     
    Kip, Whiten, duketbrd88 and 1 other person like this.
  4. zipper046

    zipper046 Well-Known Member

    Dec 28, 2013
    Addicted2gunz likes this.
  5. Dwe

    Dwe I'm a terminal 1911 Addict!

    Sep 4, 2011
    Nice guns.

    Nice shooting!
     
  6. zipper046

    zipper046 Well-Known Member

    Dec 28, 2013
    THanks @Dwe! I need to clean up the right side safeties and the bottom of the arched MSH on the CCO....I had to file and reshape them due to them digging into the web of my hand. I had used a basic flat black Krylon paint for metal...but it didn't stick!! LOL. I have some Flat black Duracoat and an application kit, but waiting to clean up a few more pieces then hit 'em all black so I don't waste too much of the paint.
     
    Kip likes this.

You need 3 posts to add links to your posts! This is used to prevent spam.

Verification:
Draft saved Draft deleted