1911 Firearm Addicts banner
1 - 6 of 6 Posts

·
Registered
Joined
·
771 Posts
Discussion Starter · #1 · (Edited)
Please contact me via email for quickest reply, and no trades at this time.

Daniel Defense DDM4V1 16” barrel, 5.56mm AR15 rifle- $1150 shipped

The original owner stated he purchased it new in 2012 and he fired approximately 1500 rounds (the minimal wear on the bolt and bolt carrier support his statement). Year of barrel production is April 2012 (first 4 digits of barrel marking) 0412xxxxx DD F MP 5.56 NATO 1/7. I have not fired it, but did a detailed cleaning and replaced a few parts to make it more marketable and closer to original configuration.

Added/upgraded/replaced parts include a Troy flip up rear sight ($119), Magpul AFG angled fore grip ($33.99), Spikes Tactical ST-T2 Buffer ($36.99), BCM VLTOR Charging Handle ($47.95), and BCM Receiver QD End Plate ($16.99). The original configuration style A2 grip and flash hider were installed, along with replacing the fixed magazine latch (was a California rifle requirement) with a Mil-Spec magazine latch and button. Includes a Daniel Defense hard case, but no paperwork, or original parts that were replaced with the above listed upgraded. Additionally, a brand new LaRue Tactical MBT-2S 2-stage trigger was just installed. Includes a brand new unworn Daniel Defense hat and Daniel Defense rifle case, but no paperwork or original parts that were replaced with the above listed upgraded. The rifle and sights have been chamber laser bore sighted.


Battle Arms Development 16” AR15 build- $975 shipped
Complete AR15 build recently completed by Colt LE Trained Armorer with 20 + years experience. All parts in this build are brand new (the charging handle has a small blemish in the finish, but it does not affect function) and the rifle is still un-fired. The upper receiver has been lapped which ensures that the barrel is true to the upper receiver by providing a perfectly perpendicular surface for the barrel extension. Additionally, the barrel has been dimpled for the gas block set screws using a proper fixture that ensures exact centering of the gas block over the barrel gas port. The barrel nut, hand guard, and flash hider have been installed according to manufacturer’s specs using a calibrated torque wrench. The sights have been laser bore sighted so you should be within 1” at 100 yards, and it has a single stage trigger duty grade trigger job.

Battle Arms Development Forged Upper & Lower Set
Brownells 16" 5.56 NATO Barrel & Gas System Kit (Black Nitride Finish)
DPMS A2 Flash Hider
Toolcraft Black Nitride Bolt Carrier Group
LaRue Tactical Charging Handle (has blemish shown in pic)
LaRue Tactical RAT Stock with Rod Kit
Aero Forward Assist & Ejection Port Kit
Critical Capabilities LLC Lower Parts Kit
BCM Mod 3 Grip
BCM Mod 0 Trigger Guard
BCM Buttstock QD end plate
Brownells Mil-Spec Buffer Tube Assembly
Parallax Tactical Free Float Super Slim 15” Handguard Rail
Magpul Gen 2 Sight Set


Please contact me via email for quickest reply.

Items might be listed on other forums so please reply via email for quickest reply or additional pics request. Not interested in trades, and I do not have, use or support PayPal so USPS Money Order.

[email protected]




Gun Firearm Trigger Machine gun Black

Gun Firearm Trigger Iron Machine gun
Gun Firearm Trigger Air gun Gun accessory
Line Black Grey Carbon Metal
Gun Wood Firearm Trigger Line
Gun Firearm Rifle Machine gun Trigger
Gun Firearm Rifle Trigger Shooting
Material property Still life photography
Gun Brick Shotgun Stone wall Trigger
 
1 - 6 of 6 Posts
Top