Dillon Price Check

Discussion in 'Caliber Talk: Ammunition, Reloading, and Shooting ' started by LBZ, Feb 2, 2019.

  1. LBZ

    LBZ Well-Known Member

    206
    Nov 2, 2016
    So I recently acquired an older XL650 and have some extra tooling I would like to sell. I would appreciate any advice on what would be a fair asking price. I have what i believe is the: Complete set up toolhead for .38/.357
    Caliber conversion and dies for .40/10mm
    2 spare tool heads one of which is a little splotchy.

    These date back to at least 2008 and I don't believe the .38 set-up was ever used.
    Pics to follow hopefully. Thanks

    upload_2019-2-2_13-57-26.jpeg
     
  2. LBZ

    LBZ Well-Known Member

    206
    Nov 2, 2016

  3. LBZ

    LBZ Well-Known Member

    206
    Nov 2, 2016
  4. LBZ

    LBZ Well-Known Member

    206
    Nov 2, 2016
  5. Apollo99

    Apollo99 Well-Known Member

    Jun 26, 2017
    The tool heads are $32 new, the 10mm dies go for $72 new, the same for the 38.,357 dies. the powder alarm is about $65 bucks and the two conversion kits 10mm and .38/,357 are $82. the stand, powder measure and the hollow die come as a set and sells as a quick change kit for $121 new.
     
  6. Apollo99

    Apollo99 Well-Known Member

    Jun 26, 2017
    With Dillon equipment, it's not the cost of the reloading press it's all the stuff you need to go with it. That bundle you have there probably has as much value as the XL650 press alone.
     
    Dub likes this.
  7. LBZ

    LBZ Well-Known Member

    206
    Nov 2, 2016

You need 3 posts to add links to your posts! This is used to prevent spam.

Verification:
Draft saved Draft deleted