Great seller and build so this shouldn’t last long. GLWS
Integrity Arms DW Valor
Selling my prized IA DW V Bob commander. I honestly can't say anything negative about this one, not that I could about anything Steve built!
It's a stainless 45 ACP Commander that has been modified to the T.
Has been silver DLC over stainless, New bushing and fire controls, beveled bottom of slide, French border, top of slide flattened and serrations, short trigger and shoots as well or better than anything I have. White ball front sight. I'm sure I missed something but more is better.
Asking 4800 shipped.
From Steve :
INTEGRITY ARMS
6281 STATE ROUTE 117
ROCKFORD, OHIO 45882
PH:419-305-4121
SUBJECT: 2014 DAN WESSON V-BOB SPEC GUN BUILD SHEET
DATE: 6-20-21
2014 V-bob very lightly fired maybe 500 rounds if that.
Original barrel locked up nice so no need to change, not hard contact but, was pounding 4-6" steel at 18-20 yards free handed.
Reliability package II:
to include EGW FPS, WC BP ss extractor, HD full fit SS ejector, disco cut, LR cut, polish feed ramp, finish ream and set barrel head space. Vis surface dressed..
Action accuracy package I:
to include short smooth faced C&S trigger with 3.25# trigger, re-work sear and hammer hooks, new colt sear spring, polish hammer cup, hammer strut, trigger bow, disconnector.. add a Radial Bore bushing and IA Recoil plug.
Flush cut and deep crown barrel
top of slide flatten and arrow serrations
re-blend grip safety for high grip
undercut trigger guard for high grip
remove crescents from trigger well
dehorn throughout
flush rear of frame to slide
crop and countersink slide stop rounded
easy slide stop mod (2014 they didn't do this lol)
French border
high power cuts
ball cuts
bottom slide bevel
carry bevels front and rear
high figure cocobolo grips with IA medallions
original sights Heine straight eight
bevel around ejection port
has an extra set of G-10 black grips that goes with it as well.
One Dan Wesson Flush mag
challis bushings and screws
bead blast satin and full silver DLC or CrN finish.
Ed Brown Single sided thumb safety.
In the hand this thing absolutely screams custom... I will have to say, I am pretty hard to impress, with my own work and I am actually impressed with this pistol.
![Air gun Trigger Gun barrel Wood Gun accessory]()
![Air gun Gun barrel Gun accessory Wood Everyday carry]()
![Air gun Trigger Gun accessory Shotgun Machine gun]()
![Toy Gesture Wrist Machine Everyday carry]()
![Aircraft Vehicle Toy Toy airplane Gas]()
![Air gun Trigger Wood Gun accessory Gun barrel]()
![Automotive tire Wood Grey Camera lens Flooring]()
![Motor vehicle Automotive tire Plant Bumper Automotive exterior]()
It's a stainless 45 ACP Commander that has been modified to the T.
Has been silver DLC over stainless, New bushing and fire controls, beveled bottom of slide, French border, top of slide flattened and serrations, short trigger and shoots as well or better than anything I have. White ball front sight. I'm sure I missed something but more is better.
Asking 4800 shipped.
From Steve :
INTEGRITY ARMS
6281 STATE ROUTE 117
ROCKFORD, OHIO 45882
PH:419-305-4121
SUBJECT: 2014 DAN WESSON V-BOB SPEC GUN BUILD SHEET
DATE: 6-20-21
2014 V-bob very lightly fired maybe 500 rounds if that.
Original barrel locked up nice so no need to change, not hard contact but, was pounding 4-6" steel at 18-20 yards free handed.
Reliability package II:
to include EGW FPS, WC BP ss extractor, HD full fit SS ejector, disco cut, LR cut, polish feed ramp, finish ream and set barrel head space. Vis surface dressed..
Action accuracy package I:
to include short smooth faced C&S trigger with 3.25# trigger, re-work sear and hammer hooks, new colt sear spring, polish hammer cup, hammer strut, trigger bow, disconnector.. add a Radial Bore bushing and IA Recoil plug.
Flush cut and deep crown barrel
top of slide flatten and arrow serrations
re-blend grip safety for high grip
undercut trigger guard for high grip
remove crescents from trigger well
dehorn throughout
flush rear of frame to slide
crop and countersink slide stop rounded
easy slide stop mod (2014 they didn't do this lol)
French border
high power cuts
ball cuts
bottom slide bevel
carry bevels front and rear
high figure cocobolo grips with IA medallions
original sights Heine straight eight
bevel around ejection port
has an extra set of G-10 black grips that goes with it as well.
One Dan Wesson Flush mag
challis bushings and screws
bead blast satin and full silver DLC or CrN finish.
Ed Brown Single sided thumb safety.
In the hand this thing absolutely screams custom... I will have to say, I am pretty hard to impress, with my own work and I am actually impressed with this pistol.
1 - 20 of 29 Posts
1 - 20 of 29 Posts
