Les Baer Concept VII / with extensive John Harrison work

Discussion in 'Sold/Expired Classifieds' started by wfxr, Jan 25, 2018.

  1. wfxr

    wfxr New Member

    16
    Jan 16, 2013
    For sale is a Les Baer Concept VII pistol that has been a safe queen since I bought it back in 2012. In same condition as when I bought it. I bought to be a carry gun, then went to a defensive shooting class for two days, and luckily did not bring this gun with me. This gun is too pretty for me to shoot, I daily carry glocks, and bang them around in my car etc. Over 1300 dollars of Harrison work done to this gun. I am going to attach pics from when I bought the gun, and the description . I have all the documentation for the interested buyer. Here is a summary:
    Les Baer Concept VII-John Harrison Worked $3,000 obo

    I have over $1,300 worth of receipts from Harrison Design that include John's Duty Carry/Trigger Job. John went through this entire pistol, changed whatever did not meet his standards and turned this into a very, very nice pistol. It is finished in a very nice Standard Blue (400 grit). Please note the pistol has GI thin alumagrips installed in these pictures. List of work Performed by John Harrison below:

    *Perform Duty/Carry Trigger Job
    *Harrison Design original Commander ignition set, EDM'd tool steel round hole Commander hammer, sear and disconnector, all prepped
    *Harrison Design Extreme Service trigger for 1911, Long Smooth face with fixed overtravel stop, natural finish
    *Colt Sear Spring
    *Pin Hammer strut, blue
    *Countersink both sides of hole in Commander hammer, blue and sand off sides for brushed finish
    *Machine spring guide seat and lower barrel lugs to Commander dimensions
    *Fit and Install new EGW plunger tube
    *Fit Ed Brown Wide extended thumb safety, and re-shape to medium carry contour and blue
    *Fit new Main Spring Housing, blend rear lower rear corner to frame
    *Refinish frame assembly in Standard Blue (400 Grit)
    *Function and Reliability Package
    *Fit and install extended EGW ejector (.38/9/40)
    *Fit EGW oversize firing pin stop (.45 Series 70)
    *Fit and Tune Wilson Bulletproof Extractor
    *Re-machine feed ramp to correct specs IMG_4069_zps5ec5ace3.jpg IMG_4068_zpsbea0e9cc.jpg IMG_4055_zps3cbf915d.jpg
     
    Last edited by a moderator: Jan 25, 2018
    Glock2740, john_anch_ak, 808 and 13 others like this.
  2. WWB

    WWB Administrator Staff Member Admin Moderator Supporting Addict

    Apr 11, 2015
    Does the Wilson come for free with the package? ;)
     

  3. postman10mm

    postman10mm Active Member

    139
    Feb 4, 2012
    Wow, never thought I would see this one again!

    Of all the guns I’ve sold, this is the only one I regret.

    The bluing is absolutely phenomenal, I while I had it, the gun was not shot after refinishing. Good luck with your sale!
     
    Steve Owens likes this.
  4. Wheels No More

    Wheels No More Long gone

    May 12, 2015
    If so I believe we can reach an accord. :p
     
    41 Charlie and Wilsonwessonbrown like this.
  5. Integrity Arms

    Integrity Arms 1911 Pistol Smith

    Mar 20, 2017
    So you were the original owner? And the refinish work was done before you sold it?
     
  6. postman10mm

    postman10mm Active Member

    139
    Feb 4, 2012
    That is correct.
     
    Steve Owens likes this.
  7. Greg6640

    Greg6640 John 14:6 Supporting Addict

    Apr 20, 2015
    Of all the pistols up for sale, this one along with 2 others are hard to resist.
    Oh to have more bank at the present time.
    John is a true gentleman and highly skilled smith. I would love to own one of his customs.
    GLWS
     
    colrhino and cwoods like this.
  8. liljoe

    liljoe Well-Known Member

    349
    Oct 5, 2017
    awesome gun brother, GLWS
     
  9. wfxr

    wfxr New Member

    16
    Jan 16, 2013
    I have not shot this gun as well. It has sat in my safe, it is the best finish I have ever seen on a gun, but then I don't own alot of these!
     
  10. wfxr

    wfxr New Member

    16
    Jan 16, 2013
    Haha , I didn't even notice that! Sorry guys no Wilson with this, just the pictures were too good for the Baer to pass up.
     
  11. PorscheGuy

    PorscheGuy Well-Known Member

    Feb 14, 2012
  12. wfxr

    wfxr New Member

    16
    Jan 16, 2013
    Price Dropped to 2500, gotta get this baby sold.
     
  13. harveydavidson

    harveydavidson New Member

    5
    Feb 25, 2018
     
  14. harveydavidson

    harveydavidson New Member

    5
    Feb 25, 2018
    HI Where Are you located?
     
  15. harveydavidson

    harveydavidson New Member

    5
    Feb 25, 2018
    2/25/18 where is the Harrison??
     
  16. harveydavidson

    harveydavidson New Member

    5
    Feb 25, 2018
    I am having trouble seeing if my messages are going
    Thru
     
  17. WWB

    WWB Administrator Staff Member Admin Moderator Supporting Addict

    Apr 11, 2015
    The OP hasn’t been on since February 10 I’m closing this listing as he obviously not to eager to sell or reply to anyone... He has wasted everyone who was interested time which is unexceptable IMO.
     
    Greg6640 and 1911wheelsnomore like this.

You need 3 posts to add links to your posts! This is used to prevent spam.

Verification:
Draft saved Draft deleted