Privacy guaranteed - Your email is not shared with anyone.

Reloading Bench Pictures

Discussion in 'Caliber Talk: Ammunition, Reloading, and Shooting ' started by rsxr22, Aug 26, 2011.

  1. rsxr22

    rsxr22 Member

    Aug 17, 2011
    Since CMG posted up pics of his reloading setup, got me thinking. We post pics of everything else, why not take a photo of your reloading bench and see whose is the cleanest and most laid out! I will post some pics up later!
  2. Hokie

    Hokie Active Member

    Aug 17, 2011
    Cobra will win this. Hands down. Mark's bench is alarmingly clean.

  3. Bender

    Bender Supporting Addict Supporting Addict

    Aug 15, 2011
    Yep,.....about as clean a sterile as a Doctor's office!
  4. Rinspeed

    Rinspeed Member

    Aug 22, 2011
    My bench is a mess right now but I hope to find some time to load this weekend. Ill have to get a pic after it's cleaned off a bit.
  5. grainfed

    grainfed Active Member

    Aug 22, 2011
    The Bunker..............

    The Results.......

    For those with a Hornady, I put the large handle screw on the BOTTOM, not the top. This makes for a much easier and shorter "radiused" cycle and has reduced "right arm fatigue" a lot.

    This neat little plastic looking sleeve simply slides up and keeps the brass intact on the shuttle. It stopped bouncing all over the place which occasionally happened and you'll see the attached "wool" piece on the bottom of the v-block. It keeps pressure on the bottom of the brass for an easy entrance into the shell plate.
    Last edited: Aug 26, 2011
  6. rsxr22

    rsxr22 Member

    Aug 17, 2011
    No contest! Just want to see what everyone is working with!
  7. rsxr22

    rsxr22 Member

    Aug 17, 2011
    Here's our setup!
    1050,650, and SL900. The jugs underneath are filled with 380, 9mm, 40, 45, 38, 357, 38 super, and 44 mag

    The cement mixer is what we tumble our .50 cal brass in and 2 tumblers are in the photo, we have 4 total.

    I single stage .50 and this is all the stuff, well and the drill press from the 2nd photo to chamfer the primer pockets.
  8. buyobuyo

    buyobuyo Member

    Aug 25, 2011
    That hydraulic press is sick. Is that what you size your .50 cal with?

    Here are my two benches.

    This bench is home to my casting equipment and LNL AP which I use for loading pistol.

    This bench is the first bench I built and has my LNL Class that I use for loading rifle and a Lee c-press that I use for punching out bad primers when I need to and hardness testing my cast bullets.
  9. Cobra64

    Cobra64 Capitalist

    Aug 17, 2011
    Holy crap! That's a serious setup. I love it.

    Does that two hp motor run the hydraulics on that black press?
  10. rsxr22

    rsxr22 Member

    Aug 17, 2011
    Thanks! Yes, that is what i re-size .50 on. It is a lot slower, but way easier on your body! Takes me about 45 min to an hr to re-size 1k
  11. rsxr22

    rsxr22 Member

    Aug 17, 2011
    Yes it does. That is strictly for re-sizing .50 like i mentioned in previous post. Currently trying to get rid of the shotgun press because Ive never used it and would like to replace it with another 650. Have one set up at all times for 124 LRN 9mm and another setup for H&G 68's(The bullet that would have been JMB's favorite)!!!!
  12. Carolinaboy

    Carolinaboy Aim Small Miss Small Supporting Addict

    Sep 17, 2011
    Wow some great setups here!
  13. Blayglock

    Blayglock Supporting Addict Supporting Addict

    Aug 18, 2011
  14. Rod38um

    Rod38um Opinionated Shooter

    Oct 5, 2011
    My humble setup..........

  15. jst1tym

    jst1tym What No Delete Button? Supporting Addict

    Aug 23, 2011
    You folks don't have anything on my setup :rofl2:
    Last edited: Oct 7, 2011
    gps man likes this.
  16. Nyack1911

    Nyack1911 1911 addict Supporting Addict

    Sep 20, 2011
    a cement mixer for a tumbler:hail:
  17. rsxr22

    rsxr22 Member

    Aug 17, 2011
    LOL whatever gets the job done!! I started tumbling about 75 pieces of .50 and knew we needed to figure something different out!
  18. Hokie

    Hokie Active Member

    Aug 17, 2011
    Whoa. :hail:
  19. dilespla

    dilespla Never made it to step 12 Supporting Addict

    Oct 12, 2011
    Wow... I'd be embarrassed to show my setup compared to these. You guys are the masters. :hail:

You need 3 posts to add links to your posts! This is used to prevent spam.

Draft saved Draft deleted