1911 Firearm Addicts banner

1 - 16 of 16 Posts

·
Registered
Joined
·
946 Posts
Discussion Starter · #1 · (Edited)
$2,700 shipped FFL to FFL lower 48. No trades please.

First “I’ll take it” reply secures it. USPS MO, certified check (may be held a week), discrete PayPal if buyer pays fees. Three day inspection and test fire period starting when it arrives at destination FFL.

Springfield Custom Shop Custom Carry 9mm. Like new, only 50 rounds shot. Set up similar to a Pro with added options you can’t get on a Pro. This is a $3k gun order with a 6+ month wait build. Somewhat rare optioned like this.

Options:
  1. High cut frontstrap (Nice improvement over the Pro)
  2. Front strap checkering (looks like 25 LPI)
  3. One-piece magwell, fully blended and checkered
  4. Black-T finish
  5. Single-sided thumb safety
  6. Ball end mill slide cuts
  7. Flush cut slide stop
  8. Flush cut & crowned barrel
  9. Gold bead front sight
  10. 10-8 rear sight .156”
  11. Pro grips
  12. Standard recoil guide & plug (2-pc FLGR included)
Comes with everything pictured, nylon case, two magazines and the factory certificate. No test target or factory build sheet available.

I am the second owner. The first owner said he ordered it, stored it and never shot it. I believe that based on initial inspection and the fact that all the slide and barrel lube had turned to a sticky wax during storage. It cleaned off perfectly (this finish is easy to clean) and it functioned perfectly afterwards with fresh oil.

I have only had one range visit with only 50 rounds through it. My local gunsmith/trainer saw it, loved it, and shot a quarter sized hole with ten rounds at 21 feet his first time picking it up. I was nearly able do the same by the fifth magazine. It’s a shooter. The barrel is fit harder than you’ll find on a 9mm and the barrel shows it.

I’m only selling to offset other purchases. This gun is very nice. Pass this one up and it may be a long wait to find another like it available. Thanks for looking!

D0FC4C76-6DED-475D-8857-B540CA93A4E9.jpeg


E3DC6E42-21EB-4099-ABA1-BDD053294BD1.jpeg


6DE61239-C2C3-4EEE-9F57-C91B5D1C1BDE.jpeg


CB8302A1-4D83-4ACD-B969-A88871B56D50.jpeg


982EDA99-BB08-4D11-A2DA-9D0DCEB45C53.jpeg


1B185E59-B314-4C48-92CE-337C5E041EFC.jpeg


D6F06589-42B8-4029-A6B1-E2A7FCBA21A4.jpeg


5665AD4B-4877-44E1-AF47-C33396725E80.jpeg


41531C0F-7F2B-444B-889B-558BC60B3A30.jpeg


7DDD406D-542B-48BB-988C-0F1E9F97F1B5.jpeg
 

·
Registered
Joined
·
379 Posts
Nice piece at a great price! SACS makes some of the finest pieces out there...these RARELY come up...and when they do, they are little gems. Also 100% agree on the barrel fit...my 9MM CC barrel was fit tighter than a old school les Baer!

GLWS
 

·
Registered
Joined
·
216 Posts
Any chance you know how this bird runs with Wilson ETM 9mm mags? Or someone else on the board? I'm thinking hard....but I've got a TON of wilson mags and don't really want to track down the switch. :)
 

·
Registered
Joined
·
1,185 Posts
Woof!!!!! That is one fabulous shooter. Whoever snagged this is one lucky hombre.
Jeff
 

·
Registered
Joined
·
8,640 Posts
  • Like
Reactions: dash
1 - 16 of 16 Posts
Top