[Shooting4fun]

Holosun --- because green is better then red for speed of target sighting. (For me)

 

[Bradd_D]

I've been an RMR guy, but the RMR HD and RCR have my attention. Holosun would be good for a Norinco I guess.

 

[MGSBigBoss]

Yup see the Ed Brown FX2 since it’s direct milled for an RMRcc

The only optic cut I was considering was the nighthawk ios. Who does good work with direct milling for rmr cc footprint ?

 

[whan]

I’d recommend against direct milling for the RMRcc. It is a fully proprietary footprint, no other dots on the market will fit so you’re stuck with a single option. Window size is also very small on the RMRcc (smaller than the 407k and eps carry), has bottom loaded battery, just in general is behind on features and capabilities.

If you’re going to direct mill, do the Holosun k footprint or ACRO IMO

 

[56cbr600rr]

DPP’s on my P and Shadow 2.


never thought I’d say this, but I am impressed with the Holosun SCS On my G45 as well.

 

[catatonic]

The only optic cut I was considering was the nighthawk ios. Who does good work with direct milling for rmr cc footprint ?

I intend on a NH IOS setup as well at some point. I wouldn’t direct mill for the CC because… well you’re stuck with it. I currently either run plate systems or have guns milled for the RMR (full-size) footprint, as it seems as though Trijicon is continuing that footprint and the prevalence of the RMR causes other companies to also utilize it.

 

[lsbbigdog]

RMR type2 6.5 moa

 

[djackson]

I have ran and still have them on guns ranging from Holosun, RMR, SRO. The sight picture in SRO is easiest pickup for me but haven’t had an issue from any of them.

 

[wrmiller]

I’d recommend against direct milling for the RMRcc. It is a fully proprietary footprint, no other dots on the market will fit so you’re stuck with a single option. Window size is also very small on the RMRcc (smaller than the 407k and eps carry), has bottom loaded battery, just in general is behind on features and capabilities.

If you’re going to direct mill, do the Holosun k footprint or ACRO IMO

This is what I did for a 5" 40 top end on my 2011. With the little 'winglets' on the 407k, I simply zero'd the dot, went home, and made a little front sight for it that had the dot sitting on top of the front sight when looking through the RDS. Works real good too.

 

[BruceBA]

Direct mill RMRcc is what I use as it is made for a 1911. Looks the best of all the red dot options too.

 

[Tactical Rico]

Trijicon RMR on everything that has a red dot................Long battery life, almost indestructible. Best there is IMHO.
TR

 

[EB_KC9]

ED Brown/RMRCC. No overhang, and to my knowledge, no other OEM cuts for the Rmrcc.

 

[Fatbob Frank]

Red ( or green) fiber optic front sight is all the red dot I like on a pistol..

 

[ctdw]

RMR for me. Have had zero issues with them and great battery life.

 

[EB_KC9]

Red ( or green) fiber optic front sight is all the red dot I like on a pistol..

When age is a factor and fiber sights or irons are very blurry without glasses, but Red Dots work perfectly......that's why I use Dots now, I have to. Last thing I need is to look for glasses to shoot accurately

 

[Bradd_D]

When age is a factor and fiber sights or irons are very blurry without glasses, but Red Dots work perfectly......that's why I use Dots now, I have to. Last thing I need is to look for glasses to shoot accurately

That and I've found fibers to be inadequate in lower light.

 

[Bradd_D]

I've got an RMR and an RCR on the way to compare. I need something for my Staccato.

 

[Busa Dave]

Am enjoying reading this thread!

Fun to see how many like the Holosun products. Yes, I know that not all models are made in China but the company is Chinese and is a supplier to the Chinese military. Imagine if this was a 1911 vs an electronic sight! Oh, The Horror! The weapon in question would be vilified to no end.

 

[Holladay]

A big fan of Trijicon RMR, but recently acquired a Aimpoint Arco P-2. I hate the mailbox look, but it’s one heck of a RDS.

 

[Additionalband]

I used RMRs and an EPS carry and really enjoy both. But for carrying the RMR auto brightness works great