[towerofpower93]

For those who have a 5" threaded Platypus, any recommendations for holsters? I currently use Safariland ALS holsters for most pistols as I like the active retention for more physically oriented matches and swapping in an RTI hanger on the back lets me swap pistols on the same war belt.

I've read elsewhere that Stacatto holsters have been working for some, but I haven't seen anyone confirm their Stacatto Safariland works with the Platypus.

Besides the 5" threaded barrel I'll also be running an RMRcc and an X300V on it, if that makes a difference.

 

[1911operator]

Will they fit in most 1911 holsters? The square trigger guard version could pose a problem, IMO.

 

[safarigene]

I run a light on mine, so I haven't run into any issues with a holster designed for a weapon mounted light. I did try it in a leather holster for a railed 1911 with an optic on it, and it did fit. Kydex that retains the gun from the trigger guard might have to be custom built however. None of my other 1911 holsters are cut for an optic, so I can't try them.

 

[Bob JD]

View attachment 1309197 View attachment 1309199

Very nice.

 

[notshawn54]

My nephew was a Phineus and Ferb fan. I may have to get him one

Only if you get him the Perry version.

it was a well written cartoon. I used to watch it with my boys when they were younger. Just enough humor for the adults.

 

[Chowser]

Mine was sitting at assembled for two weeks. I got shipping notice today. Should be here Monday. Gotta find my 125gr ammo. Got a shipment the other day, was supposed to be 5 cases 147gr and 10 cases 125gr. I got 15 cases of 147gr.

 

[Thebiochemist]

Will they fit in most 1911 holsters? The square trigger guard version could pose a problem, IMO.

Staccatos have square trigger guards, may be the same holster.

Sent from my SM-S908U using Tapatalk

 

[TacticalSpeed]

Anyone here run their Platypus with a can yet? I hope mine runs well with my Obsidian 9 & also my Odessa 9 that is in jail. Still eagerly waiting for my Platypus to be finished.

Also, how do you like the grip angle, folks?

 

[Chowser]

Son’s Platypus has arrived. Fit and finish are excellent. It’s smooth. Trigger is 3lbs. Very very slight take-up before break.

Regular Glock + baseplates fit. Shield Arms +5 baseplates do not fit because of the pin. It hits the magwell.

I’ll shoot it Wednesday. Son can’t shoot it till Friday.

 

[asierra350]

I've run about 4 magazines through mine without any issues or hiccups. Not enough for a thorough evaluation but I do have some initial thoughts.

I got mine with the 407k optic cut. I like the mounting system that Stealth put on these, but the cerakote finish seemed to make the lugs just a little too big to fit into the recess on the optic. I had to scrape the coating off to make a solid connection.

I shot the 4 magazines side by side with a Staccato P (Vulcan ported). The grip on the Platypus feels identical to a Glock to me. The grip angle is the same as the Staccato but it's nowhere near as comfortable. It's not bad, just feels like a 2x4 compared to the Staccato. The grip texture is also not very aggressive. The front and backstrap is fairly tactile but the sides are not. Good grip pressure is a must.

Recoil was much more noticeable than with the Staccato. Not a fair comparison as the P is ported but still a stark difference. The Platy doesn't have excessive recoil, just more. Again, good grip and fundamentals a must.

Taking the gun down for the first time was kind of a pain. The two piece guiderod is obviously not ideal but the slidestop took some effort to get lined up properly and out of the gun. The barrel bushing is tight, requiring a bushing wrench to remove. I'm not sure if the coating is causing this and if it will loosen up after more shooting but I was very pleased with how it fit. (I like hardfit guns).

I had the magwell optioned on mine and the supplied magazines sit lower than flush with the magwell, not a problem as most add aftermarket baseplates to Glock magazines. Of course the 33 round funsticks solve this problem also.

More info to follow as I get more experience with it, I'm happy with it so far though.

 

[safarigene]

I put some MOAB extensions on a couple glock mags and ended up having to do some fitting for them to seat. Had to knock down the edges on the top of the extension , but not a big deal. With the slide stop, I found that you have to push it down towards the bottom of the gun and then it slides out easily.

 

[Chowser]

Backed the top pin out a little. All mags fit now.

 

[flashbang72]

an amazing choice man

 

[TacticalSpeed]

I put some MOAB extensions on a couple glock mags and ended up having to do some fitting for them to seat. Had to knock down the edges on the top of the extension , but not a big deal. With the slide stop, I found that you have to push it down towards the bottom of the gun and then it slides out easily.

I hope the pile of Factory Glock 19X 19 round mags I have fit

 

[TacticalSpeed]

I've run about 4 magazines through mine without any issues or hiccups. Not enough for a thorough evaluation but I do have some initial thoughts.

I got mine with the 407k optic cut. I like the mounting system that Stealth put on these, but the cerakote finish seemed to make the lugs just a little too big to fit into the recess on the optic. I had to scrape the coating off to make a solid connection.

I shot the 4 magazines side by side with a Staccato P (Vulcan ported). The grip on the Platypus feels identical to a Glock to me. The grip angle is the same as the Staccato but it's nowhere near as comfortable. It's not bad, just feels like a 2x4 compared to the Staccato. The grip texture is also not very aggressive. The front and backstrap is fairly tactile but the sides are not. Good grip pressure is a must.

Recoil was much more noticeable than with the Staccato. Not a fair comparison as the P is ported but still a stark difference. The Platy doesn't have excessive recoil, just more. Again, good grip and fundamentals a must.

Taking the gun down for the first time was kind of a pain. The two piece guiderod is obviously not ideal but the slidestop took some effort to get lined up properly and out of the gun. The barrel bushing is tight, requiring a bushing wrench to remove. I'm not sure if the coating is causing this and if it will loosen up after more shooting but I was very pleased with how it fit. (I like hardfit guns).

I had the magwell optioned on mine and the supplied magazines sit lower than flush with the magwell, not a problem as most add aftermarket baseplates to Glock magazines. Of course the 33 round funsticks solve this problem also.

More info to follow as I get more experience with it, I'm happy with it so far though.

Thank you. Going to try grip tape on the sides?

 

[asierra350]

Thank you. Going to try grip tape on the sides?

I haven’t thought about it yet, it would definitely benefit from adding grip tape, wonder if Talon will come out with something for the platy

 

[TacticalSpeed]

I haven’t thought about it yet, it would definitely benefit from adding grip tape, wonder if Talon will come out with something for the platy

If I don't care for the grip, I'll just use some of the "sandpaper" grip tape I have and cut it to fit

 

[safarigene]

I have had a hard time getting grip tape to stick to the frame. I haven't gotten the nerve up to try and put silicon carbide on it and permanently alter the frame. Each time I have put tape on it, it just wont stay put.

 

[Glock2740]

I’m tempted to try one of these out.🤔

 

[Jthrelf]

I have had a hard time getting grip tape to stick to the frame. I haven't gotten the nerve up to try and put silicon carbide on it and permanently alter the frame. Each time I have put tape on it, it just wont stay put.

Talon grip sheets cut to size may work since they get activated by heat and stick pretty well